Fire Systems Ltd

Tel: 020 8541 5646

Wireless Fire Alarms

Specialist Wireless Installer

Today's wireless systems take advantage of the of the most up-to-date radio technology on the market to deliver immediate, yet affordable wireless fire alarm systems along minimal disruption towards the building and surroundings.

Hybrid Option - Mixture of Wired and Wireless

Wireless systems can be completely wireless or hybrid functionality along with an excellent choice of field devices. The Wireless systems are a secure choice protecting a valuable heritage property, extending the size of a pre-existing wired fire alarm in an occupied hotel or supplying temporary fire cover for a constructing site.

In today's commercial market, there exists a tremendous variety of projects, from ultra-modern, in which the accessibility to install cabling might not be an option. Wireless systems have provided designers with an exceptionally adaptable and non-intrusion strategy for fire alarm design challenges

Continue reading

Equipment to Wireless Products Code EN54-25

To achieve the optimum levels of reliability and performance of wireless field devices which happen to have equivalent appearance and capability of very best wired products, Wireless relies upon some complex technology. To comply with the most current European Standard (EN54: Part 25 2008) Radio communication the equipment is Bi-directional and take advantage of the approved 868MHz frequency. The Wireless Fire Alarm manufacturers must comply with EN54-25

Wireless Technology influenced solutions

The wireless network preserves the security and reliability of transmission using a selection of automated system adjustments, including channel hopping, amplitude realignment and drift harmonising.

The improved wireless transmitting and receiving protocol enables the alarm system to deliver totally intelligent site device implementation and allows analogue information, fire and fault data, device addresses and sort codes to be transmitted to the fire alarm control panel.

Challenging sites

All installations will contain a challenging aspect of one sort or another, these might vary from a fragile and ornamental ballroom ceiling, contaminated asbestos structure or an out of the way security station with virtually no cable accessibility.

The wireless fire alarm system provides a simple solution to most of these installation challenges. The hybrid approach allows the fire alarm system designer to decide the amount and in which locations the fire alarm has to be wired and which areas wireless, allowing the most cost-effective choice and practical solution. In locations where the site’s architecture or building occupation prevents cabling, this scenario can be managed using a completely wireless system.

User-friendly installation

When undertaken the right way, any cabled installation demands a contractor who is competent and neat, to permit the fire alarm installation not to turn out to be intrusive. The requirement of cable containment, the usage of power tools and in most cases an amount of decoration, on completion of the installation is necessary. In comparison, all that's required whenever installing a radio wireless device is the capability to fit very few screws per device.

Hardly any disruption

Time is money throughout all avenues of life, whether you're managing a luxurious hotel, busy office or a bank, disruption to your day to day operation is costly. Typically, a building having to close or having the installation carried out, outside normal hours can be expensive.

In these situations, wireless systems now give you a simple option, since their low-noise and quick installation generally allows work to keep going throughout the normal routine site activities.

The installation of the units are non-intrusive consequently damage to room decoration or the building structure is avoided as well as the mess and redecoration required following the majority of wired installations.

Affordable solutions

The wireless alarm system is not merely an advanced solution to challenging installation issues but also delivers actual business advantages to the installer and consumer. In addition, a swift installation time cuts down on project time and as a result many other associated project costs. Project managing time, site overheads and access equipment hire all could be reduced.

By applying the most up-to-date in wireless fire alarm equipment at a cost-effective cost and all this together with the reduction in installation costs, allows wireless to be a consideration for any project.


© Copyright 2017 Fire Systems Ltd. All Rights Reserved.

Web Design & Development